quokka
Station Foreman
Trying to be good however not always managing it......................................
Posts: 82 
|
Post by quokka on Oct 15, 2013 2:30:19 GMT
This is to do with Members Vs Guests Can i suggest that you limit what forums guests can read and maybe that way it will entice guest to become members.... I am not sure what a guest can access however sometimes when i have logged myself out i can still read all the threads. Can they view members profiles?  Q |
|
quokka
Station Foreman
Trying to be good however not always managing it......................................
Posts: 82
|
Post by quokka on Oct 15, 2013 2:33:16 GMT
Just logged out again and yes a guest can see members profiles by clicking on their username.. Members and Profiles do not show up on the top tabs, however easy to negotiate around.
Q
|
|
|
|
Post by GentlemanJim on Oct 15, 2013 14:52:27 GMT
Just logged out again and yes a guest can see members profiles by clicking on their username.. Members and Profiles do not show up on the top tabs, however easy to negotiate around. Q I will get our Teccy guys to have a look to see what can be done. |
|
|
|
Post by GentlemanJim on Oct 15, 2013 15:33:17 GMT
You need to go to your Profile.
Edit Profile
Privacy.
In Privacy Settings you find several options just alter these.
I have had a quick look at the settings regarding what is available to Guests and think these need to be altered but again there are options that Admin will need to discuss.
Have a look at the Model Railway board as a Guest as I've altered the settings.
|
|
quokka
Station Foreman
Trying to be good however not always managing it......................................
Posts: 82
|
Post by quokka on Oct 16, 2013 2:11:17 GMT
Thanks Gentlemanjim, will go have a look see. will have a look at the privacy settings.
Thank you so much x
Q
|
|
quokka
Station Foreman
Trying to be good however not always managing it......................................
Posts: 82
|
Post by quokka on Oct 16, 2013 2:17:58 GMT
Ok as a guest i could still see the Model Railway forum, and your profile, i had an error message when viewing this thread and when clicking onto my own username.
thank you Jim
Q
|
|
